Beer Can Repair
I provide a full range of beer can repair services including dent removal, lid installation, drinking cup conversion, and flat sheet rolling. Also, I can stretch cans to remove gear marks while maintaining the correct height of the can. I am set up to repair:
- 8, 10, 11, 12, 14, 15 & 16 oz beer cans
- 12 oz cone tops and bottoms
- Crowntainers
- Quarts
Attention is paid to detail to ensure that top quality work is completed on each and every can. The repairs are done in such a way that the work is almost undetectable. This is done by either re-using the original lid or using a donor lid from a similar vintage can.
Rolling cans: I have the ability to roll 8, 11, 12, 15, 16, & 32 oz cans. A hook seam is used and is soldered to provide a strong and factory looking seam. There is an option to have a three notched seam. This is the style seen on many original flat tops.
In order to properly roll a can the sheet needs to be at least:
- 8, 12 & 16 oz cans: 8 5/16" long
- 11 & 15 oz cans: 8" long
- Quart cans: 11 13/16" long
Please read the Disclaimer so you are familiar with the inherent risks associated with can repair.
I am interested in any donor cans, extra lids, or canning equipment you have for sale.
Call Art at 972-539-9820 or E-mail us to discuss the details.
Example of can repair:
This is an example of a flat sheet and below is what the can looks like rolled.
This is an example of a flat sheet and below is what the can looks like rolled.
